Magnets need mold manufacturing. Ordinary specifications have ready-made molds. If special shapes are required, please notify us in advance because mold making takes time. Magnets are a hard sintered product that is economical and durable. The residual magnetic flux density is based on the size ratio and shape. When designing, you need to know the size ratio, magnetic direction and its individual use information first.

The material of special-shaped magnets is relatively brittle and the processing procedure is relatively complicated. It is mainly used in various industrial uses such as machines, motors, wind turbines, etc. In particular, special-shaped electromechanical magnets are a common type of special-shaped magnets in daily production.

Advantages of special-shaped magnets: high cost-effective products and good mechanical properties. They have been widely used in modern industry and electronic technology.

Special-shaped magnets need to be processed and produced in strict accordance with the size standards designed in the drawings, so accurate measurement and inspection are required after processing. The image measuring instrument can just meet the measurement needs of various sizes of special-shaped magnets.

In addition to the general length and width dimensions, the image measuring instrument can also measure magnet flatness, multi-segment arcs of special-shaped magnets, magnet diameter radius, special-shaped magnet R angle, magnet height, special-shaped magnet aperture, ring magnet concentricity, etc. It can meet your measurement requirements for various sizes of special-shaped magnets from multiple angles and directions.

Of course, magnet measurement is not limited to special-shaped magnet measurement, such as connector strong magnet measurement, round magnet measurement, square magnet measurement, punched magnet measurement, motor magnet measurement, etc.